Facile non‐lithographic route to highly aligned silica nanopatterns using unidirectionally aligned polystyrene‐block‐polydimethylsiloxane films

Thin films (monolayer and bilayer) of cylinder forming polystyrene‐block‐polydimethylsiloxane (PS‐b‐PDMS) were shear aligned by the swelling and deswelling of a crosslinked PDMS pad that was physically adhered to the film during solvent vapor annealing. The nanostructures formed by self‐assembly were exposed to ultraviolet‐ozone to partially oxidize the PDMS, followed by calcination in air at 500 °C. In this process, the PS segments were fully decomposed, while the PDMS yielded silica nanostructures. The highly aligned PDMS cylinders were thus deposited as silica nanolines on the silicon substrate. Using a bilayer film, the center‐to‐center distance of these features were effectively halved from 38 to 19 nm. Similarly, by sequential shear‐alignment of two distinct layers, a rhombic array of silica nanolines was fabricated. This methodology provides a facile route to fabricating complex topographically patterned nanostructures. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1058–1064     

Direct Intermediate Regulation Enabled by Sulfur Containers in Working Lithium–Sulfur Batteries

Polysulfide intermediates (PSs), the liquid-phase species of active materials in lithium–sulfur (Li-S) batteries, connect the electrochemical reactions between insulative solid sulfur and lithium sulfide and are key to full exertion of the high-energy-density Li-S system. Herein, the concept of sulfur container additives is proposed for the direct modification on the PSs species. By reversible storage and release of the sulfur species, the container molecule converts small PSs into large organosulfur species. The prototype di(tri)sulfide-polyethylene glycol sulfur container is highly efficient in the reversible PS transformation to multiply affect electrochemical behaviors of sulfur cathodes in terms of liquid-species clustering, reaction kinetics, and solid deposition. The stability and capacity of Li-S cells was thereby enhanced. The sulfur container is a strategy to directly modify PSs, enlightening the precise regulation on Li-S batteries and multi-phase electrochemical systems.     

自聚焦透镜高效批量加工的双面研磨抛光法研究

依据双面研磨抛光原理，提出了加工自聚焦透镜平面和斜面辅助工装设计.从工艺技术特点和生产实际过程等方面对设计的工装使用情况进行分析验证.多次大批量加工实践证明，该辅助工装的设计完全满足了自聚焦透镜高效批量加工技术要求，简化整个生产线工艺，减少工艺流程时间，降低材辅料的消耗成本，从而验证了双面研磨抛光法是一种实用的加工自聚焦透镜的新方法.     

变系数非线性方程的Jacobi椭圆函数展开解

把Jacobi椭圆函数展开法扩展并应用到求解变系数的非线性演化方程,比较方便地得到新的解析解 关键词： Jacobi椭圆函数 变系数非线性方程 类椭圆余弦波解 类孤子解     

2,7-二氯荧光素与蛋白质相互作用的分光光度法研究

首次采用分光光度法研究了模拟生理条件(pH 7.4 Tris-HCl缓冲溶液,离子强度I=0.1)下2,7-二氯荧光素与牛血清白蛋白(BSA)相互作用的情况.研究结果表明:两者相互作用形成稳定的复合物,最大吸收波长为509nm,与2,7-二氯荧光素的最大吸收波长502nm比较,红移了7nm;两者之间主要通过静电引力结合,但并不排除疏水作用力和氢键;两者之间的结合数为32.     

为实现准等熵压缩的波阻抗梯度飞片的实验研究

采用粉末冶金方法,制备出波阻抗沿厚度方向呈特定分布的WMoTi体系梯度飞片,在二级轻气炮上进行了梯度飞片击靶实验的初步研究.结果表明,利用梯度飞片可以实现对靶样品的准等熵压缩,击靶后产生的波阵面是平缓、连续上升的,明显不同于冲击压缩的陡峭波阵面,靶面压力峰值最高达到了167GPa.波阻抗按二次函数分布的梯度飞片能够获得最佳的击靶波形 关键词： 波阻抗梯度飞片 准等熵压缩     

脉冲电场屏蔽效能测试系统及测试方法

 自主研制了一套小型脉冲电场屏蔽效能测试系统，该系统由脉冲电场发射设备和脉冲电场测试设备构成。脉冲电场发射设备的天线口面前60 cm处可产生峰值达7.5 kV/m的脉冲电场，测试设备的动态测试范围达97 dB。系统采用光纤测量设备，在测量工作中能有效抑制强电磁场干扰。采用Matlab编写自动测量及数据处理程序，实现了数据采集与处理自动化。实验测量了金属桥架、控制柜、屏蔽帐篷、导电水泥混凝土房的脉冲电场屏蔽效能，其脉冲电场峰值衰减量分别为52,64,66,30 dB。实验表明可用脉冲电场的峰值衰减量来评估屏蔽体的脉冲电场屏蔽效能。     

石英亚沸蒸馏器蒸馏浓缩富集FAAS法同时测定自来水中的铅和镉

把分析测试工作中常用来制备高纯水的石英亚沸蒸馏器用于浓缩富集自来水中的铅、镉,并用火焰原子吸收光谱法对铅、镉进行测定.     

顽火辉石的高温高压同步辐射研究

 采用同步辐射能量色散X射线衍射技术、激光加热技术和金刚石对顶砧（DAC）高压装置，在温度为2 000 K和压力为23 GPa的范围内，对采自地幔二辉橄榄岩中的顽火斜方辉石，进行了原位的高温高压能量色散X射线衍射（EDXRD）测量。实验结果表明：当压力为15.3 GPa、温度为1 600 K时（相当于地球内部410 km处的地震波不连续界面的温压环境），顽火斜方辉石转变为橄榄石的β相——瓦兹利石（Wadsleyite）相；继续加温加压至2 000 K、23 GPa时（相当于地球内部670 km处的地震波不连续界面的温压环境），顽火斜方辉石相变为钛铁矿（Ilmenite）结构和钙钛矿（Perovskite）结构的混和相。实验结果进一步证明，在地幔中存在的两个地震波不连续界面是由橄榄石、顽火斜方辉石等矿物的相变引起的。     

在不同激光脉宽下的高次谐波

用数值计算方法计算了不同强激光脉冲宽度下高次谐波的产生.我们发现对于激光场强度不高,不能有效电离初态的激光场,长脉冲宽度可以更有效产生高次谐波;而对于高场强的激光场,由于它能够在几个光学周期之内把原子的初态全部电离,所以短脉冲的激光场能够更有效产生高次谐波.